Specially used for getting rid of the exceeding-standard flunrine in drinking water. the rate of removing fluorine is over than 90%.
It's measured by Institute of Environmental Health Monitoring(IEHM),Chinese Academy of Preventive Medicine(CAPM)that
the water quality has reached not only national sanitary for drinking water of China but also such standard of WHO,USA and EC. |
|
|
|
| Specifications︰ | Aperture:0.1μm--50μm
Porosity:40--60%
Tensile strength:>4Mpa
Resistance to impact:>4.5Mpa
Deformation temperature:≥100℃
Filtration efficiency: particles of 1μm(with filter cartridge of 10mm thick)can be completely removed.
Adsorptive capacity of Benzene:40--90%
Adsorption rate of carbon tetrachloride:60--90%
Operating pressure drop:0.1-0.2 kgF/c㎡
Maximum pressurization :7kgF/c㎡
Maximum pressure drop:4kgF/c㎡
Maximum flow:8L/min(water △ρ=0.15kgF/c㎡,with filter cartridge of 10 inch) |
| Advantages︰ | 1.High-accurate separation.
2.Preferential adsorption.
3.Tasty water quality.
4.Strong pertinence.
5.Safeness and reliability.
6.Easy to popularize.
|
|
|
|
